- All
- Product Name
- Product Keyword
- Product Model
- Product Summary
- Product Description
- Multi Field Search
 |
| Quantity: | |
|---|---|
Safety Data Sheet
Section 1: Company Identification
Product Name: STEEL SHOT S110-S930
ORIGINAL : SHARREE (H.K.) COMMERCIAL SERVICE CO.,LIMITED
SHARREE COMMERCIAL SERVICE CO.,LTD.
REGISTER NO: 913703036792327551
Contact info:
1806-1807, 18F, headquarters building, No.108, Huaguang Road, Zhangdian District, Zibo City, Shandong Province China PR
TEL.0086-533-2110122
E-MAIL: admin@sharreemill.cn
sharreecn@outlook.com
Section 2: Composition and Information on Ingredients
Chemicals Composition(Typicals) and CAS NO:
Fe% : >96 CAS NO:1309-37-1
C% : 0.83 CAS NO:1333-86-4
Si% : 0.42 CAS NO:7440-21-3
Mn% :0.68 CAS NO:7439-96-5
S% :0.032 CAS NO:63705-05-5
P% :0.030 CAS NO:7723-14-0
Chemical Formula: NOT AVAILABLE
3. Hazards Identification
Emergency Overview
CAUTION! MAY CAUSE IRRITATION TO SKIN, EYES, AND RESPIRATORY TRACT.
Ratings (Provided here for your convenience)
Health Rating: 1 - Slight
Flammability Rating: 0 - None
Reactivity Rating: 0 - None
Contact Rating: 1 - Slight
Potential Health Effects
Inhalation: Hazard is principally that of a nuisance dust. Coughing or shortness of breath may occur in cases of excessive inhalation.
Ingestion: No adverse effects expected.
Skin Contact: May cause irritation with redness and pain.
Eye Contact: No adverse effects expected but dust may cause mechanical irritation.
Chronic Exposure: No adverse effects expected.
Aggravation of Pre-existing Conditions: Not expected to be a health hazard.
4. First Aid Measures
Inhalation: Remove to fresh air. Get medical attention for any breathing difficulty.
Ingestion: Give several glasses of water to drink to dilute. If large amounts were swallowed, get medical advice.
Skin Contact: Immediately flush skin with plenty of water for at least 15 minutes. Remove contaminated clothing and shoes. Wash clothing before reuse. Thoroughly clean shoes before reuse. Get medical attention if irritation develops.
Eye Contact: Immediately flush eyes with plenty of water for at least 15 minutes, lifting upper and lower eyelids occasionally. Get medical attention if irritation persists.
5. Fire Fighting Measures
Fire:
Not considered to be a fire hazard.
Explosion:
Not considered to be an explosion hazard.
Fire Extinguishing Media:
Use any means suitable for extinguishing surrounding fire.
Special Information:
Use protective clothing and breathing equipment appropriate for the surrounding fire and to protect against the aluminum oxide dust that may be dispersed in the air.
6. Accidental Release Measures
Ventilate area of leak or spill. Wear appropriate personal protective equipment as specified in Section 8. Spills: Sweep up and containerize for reclamation or disposal. Vacuuming or wet sweeping may be used to avoid dust dispersal.
7. Handling and Storage
Keep in a tightly closed container, stored in a cool, dry, ventilated area. Protect against physical damage. Containers of this material may be hazardous when empty since they retain product residues (dust, solids); observe all warnings and precautions listed for the product.
8. Exposure Controls/Personal Protection
Futher information for system design and engineering measure: Not applicable Components with specific control parameters as limit values: Observe the local bylaws in terms of fine dust
Personal protection equipment: General protection and hygiene measures: Observe standard industrial hygiene practice Respiratory protection: Avoid inhaling the dust. Fine-dust mask with category P1 filter must be used if fine dust limits are exceeded. Hand protection: Protective gloves are recommended Eye protection: Safety glasses are recommended Ventilation System:
A system of local and/or general exhaust is recommended to keep employee exposures below the Airborne Exposure Limits. Local exhaust ventilation is generally preferred because it can control the emissions of the contaminant at its source, preventing dispersion of it into the general work area. Please refer to the ACG
Personal Respirators (NIOSH Approved):
If the exposure limit is exceeded and engineering controls are not feasible, a half facepiece particulate respirator (NIOSH type N95 or better filters) may be worn for up to ten times the exposure limit or the maximum use concentration specified by the appropriate regulatory agency or respirator supplier, whichever is lowest.. A full-face piece particulate respirator (NIOSH type N100 filters) may be worn up to 50 times the exposure limit, or the maximum use concentration specified by the appropriate regulatory agency, or respirator supplier, whichever is lowest. If oil particles (e.g. lubricants, cutting fluids, glycerine, etc.) are present, use a NIOSH type R or P filter. For emergencies or instances where the exposure levels are not known, use a full-facepiece positive-pressure, air-supplied respirator. WARNING: Air-purifying respirators do not protect workers in oxygen-deficient atmospheres.
Skin Protection:
Wear protective gloves and clean body-covering clothing.
Eye Protection:
Use chemical safety goggles. Maintain eye wash fountain and quick-drench facilities in work area.
9. Physical and Chemical Properties
Appearance: dark blue or colorful grain and powder.
Odor threshold: Odorless.
Solubility: Insoluble in water.
Density: ≥7.8 g/cm3
pH: No information found.
Harness: 45HRC
Boiling Point: 2750℃
Melting Point: 1535℃
Freezing point: N/A
Flammability: N/A
Oxidizing properties: N/A
Vapor Density (Air=1): No information found.
Vapor Pressure (mm Hg): No information found.
Evaporation Rate (BuAc=1): No information found.
10. Stability and Reactivity
Stability: Stable under ordinary conditions of use and storage.
Hazardous Decomposition Products: No information found.
Hazardous Polymerization: Will not occur.
Incompatibilities: Chlorine trifluoride, Ethylene oxide.
Conditions to Avoid: Incompatibles.
11. Toxicological Information
Classified as non-toxic
12. Ecological Information
Environmental Fate: No information found.
Environmental Toxicity: No information found.
13. Disposal Considerations
Whatever cannot be saved for recovery or recycling should be managed in an appropriate and approved waste disposal facility. Processing, use or contamination of this product may change the waste management options. State and local disposal regulations may differ from federal disposal regulations. Dispose of container and unused contents in accordance with federal, state and local requirements.
14. Transport Information
Land transport (ADR/RID/GGVSE) This product is not regulated as a hazardous material or dangerous goods for transportation
Sea transport(IMDG-Code/GGVSee) This product is not regulated as a hazardous material or dangerous goods for transportation
Air transport(ICAO-TI/IATA-DGR): This product is not regulated as a hazardous material or dangerous goods for transportation
Additional information No other information available
15. Regulatory Information
Current dust exposure limits to be found in latest edition of Health & Safety Executive Guidance Note EH40.
16. Other Information
This products was supplied by SHARREE COMMMERCIAL SERVICE CO.,LTD, All the products offered to the customer is analysised by fac lab department, which is accoply with our plant standard and Nationals satandard both.
We are going to give out the further explanation if produts standards revised.
Safety Data Sheet
Section 1: Company Identification
Product Name: STEEL SHOT S110-S930
ORIGINAL : SHARREE (H.K.) COMMERCIAL SERVICE CO.,LIMITED
SHARREE COMMERCIAL SERVICE CO.,LTD.
REGISTER NO: 913703036792327551
Contact info:
1806-1807, 18F, headquarters building, No.108, Huaguang Road, Zhangdian District, Zibo City, Shandong Province China PR
TEL.0086-533-2110122
E-MAIL: admin@sharreemill.cn
sharreecn@outlook.com
Section 2: Composition and Information on Ingredients
Chemicals Composition(Typicals) and CAS NO:
Fe% : >96 CAS NO:1309-37-1
C% : 0.83 CAS NO:1333-86-4
Si% : 0.42 CAS NO:7440-21-3
Mn% :0.68 CAS NO:7439-96-5
S% :0.032 CAS NO:63705-05-5
P% :0.030 CAS NO:7723-14-0
Chemical Formula: NOT AVAILABLE
3. Hazards Identification
Emergency Overview
CAUTION! MAY CAUSE IRRITATION TO SKIN, EYES, AND RESPIRATORY TRACT.
Ratings (Provided here for your convenience)
Health Rating: 1 - Slight
Flammability Rating: 0 - None
Reactivity Rating: 0 - None
Contact Rating: 1 - Slight
Potential Health Effects
Inhalation: Hazard is principally that of a nuisance dust. Coughing or shortness of breath may occur in cases of excessive inhalation.
Ingestion: No adverse effects expected.
Skin Contact: May cause irritation with redness and pain.
Eye Contact: No adverse effects expected but dust may cause mechanical irritation.
Chronic Exposure: No adverse effects expected.
Aggravation of Pre-existing Conditions: Not expected to be a health hazard.
4. First Aid Measures
Inhalation: Remove to fresh air. Get medical attention for any breathing difficulty.
Ingestion: Give several glasses of water to drink to dilute. If large amounts were swallowed, get medical advice.
Skin Contact: Immediately flush skin with plenty of water for at least 15 minutes. Remove contaminated clothing and shoes. Wash clothing before reuse. Thoroughly clean shoes before reuse. Get medical attention if irritation develops.
Eye Contact: Immediately flush eyes with plenty of water for at least 15 minutes, lifting upper and lower eyelids occasionally. Get medical attention if irritation persists.
5. Fire Fighting Measures
Fire:
Not considered to be a fire hazard.
Explosion:
Not considered to be an explosion hazard.
Fire Extinguishing Media:
Use any means suitable for extinguishing surrounding fire.
Special Information:
Use protective clothing and breathing equipment appropriate for the surrounding fire and to protect against the aluminum oxide dust that may be dispersed in the air.
6. Accidental Release Measures
Ventilate area of leak or spill. Wear appropriate personal protective equipment as specified in Section 8. Spills: Sweep up and containerize for reclamation or disposal. Vacuuming or wet sweeping may be used to avoid dust dispersal.
7. Handling and Storage
Keep in a tightly closed container, stored in a cool, dry, ventilated area. Protect against physical damage. Containers of this material may be hazardous when empty since they retain product residues (dust, solids); observe all warnings and precautions listed for the product.
8. Exposure Controls/Personal Protection
Futher information for system design and engineering measure: Not applicable Components with specific control parameters as limit values: Observe the local bylaws in terms of fine dust
Personal protection equipment: General protection and hygiene measures: Observe standard industrial hygiene practice Respiratory protection: Avoid inhaling the dust. Fine-dust mask with category P1 filter must be used if fine dust limits are exceeded. Hand protection: Protective gloves are recommended Eye protection: Safety glasses are recommended Ventilation System:
A system of local and/or general exhaust is recommended to keep employee exposures below the Airborne Exposure Limits. Local exhaust ventilation is generally preferred because it can control the emissions of the contaminant at its source, preventing dispersion of it into the general work area. Please refer to the ACG
Personal Respirators (NIOSH Approved):
If the exposure limit is exceeded and engineering controls are not feasible, a half facepiece particulate respirator (NIOSH type N95 or better filters) may be worn for up to ten times the exposure limit or the maximum use concentration specified by the appropriate regulatory agency or respirator supplier, whichever is lowest.. A full-face piece particulate respirator (NIOSH type N100 filters) may be worn up to 50 times the exposure limit, or the maximum use concentration specified by the appropriate regulatory agency, or respirator supplier, whichever is lowest. If oil particles (e.g. lubricants, cutting fluids, glycerine, etc.) are present, use a NIOSH type R or P filter. For emergencies or instances where the exposure levels are not known, use a full-facepiece positive-pressure, air-supplied respirator. WARNING: Air-purifying respirators do not protect workers in oxygen-deficient atmospheres.
Skin Protection:
Wear protective gloves and clean body-covering clothing.
Eye Protection:
Use chemical safety goggles. Maintain eye wash fountain and quick-drench facilities in work area.
9. Physical and Chemical Properties
Appearance: dark blue or colorful grain and powder.
Odor threshold: Odorless.
Solubility: Insoluble in water.
Density: ≥7.8 g/cm3
pH: No information found.
Harness: 45HRC
Boiling Point: 2750℃
Melting Point: 1535℃
Freezing point: N/A
Flammability: N/A
Oxidizing properties: N/A
Vapor Density (Air=1): No information found.
Vapor Pressure (mm Hg): No information found.
Evaporation Rate (BuAc=1): No information found.
10. Stability and Reactivity
Stability: Stable under ordinary conditions of use and storage.
Hazardous Decomposition Products: No information found.
Hazardous Polymerization: Will not occur.
Incompatibilities: Chlorine trifluoride, Ethylene oxide.
Conditions to Avoid: Incompatibles.
11. Toxicological Information
Classified as non-toxic
12. Ecological Information
Environmental Fate: No information found.
Environmental Toxicity: No information found.
13. Disposal Considerations
Whatever cannot be saved for recovery or recycling should be managed in an appropriate and approved waste disposal facility. Processing, use or contamination of this product may change the waste management options. State and local disposal regulations may differ from federal disposal regulations. Dispose of container and unused contents in accordance with federal, state and local requirements.
14. Transport Information
Land transport (ADR/RID/GGVSE) This product is not regulated as a hazardous material or dangerous goods for transportation
Sea transport(IMDG-Code/GGVSee) This product is not regulated as a hazardous material or dangerous goods for transportation
Air transport(ICAO-TI/IATA-DGR): This product is not regulated as a hazardous material or dangerous goods for transportation
Additional information No other information available
15. Regulatory Information
Current dust exposure limits to be found in latest edition of Health & Safety Executive Guidance Note EH40.
16. Other Information
This products was supplied by SHARREE COMMMERCIAL SERVICE CO.,LTD, All the products offered to the customer is analysised by fac lab department, which is accoply with our plant standard and Nationals satandard both.
We are going to give out the further explanation if produts standards revised.
